DIR_CRS_ROOT_SCRIPTS_MANUAL_TEXTdbracprovUsing root privileges, execute Grid infrastructure Oracle home/root.sh on the nodes to be extended. After all the root scripts are executed on all the nodes successfully, select the manual step and click Continue to proceed with the Deployment Procedure execution. DIR_ASM_CLONE_DESCdbracprovStep to clone the ASM oracle home on the new nodes. This will configure the home to the specific machine. PHASE_DESC_DELETE_ASM_HOMESdbracprovDeletes ASM homes from the node(s) being deleted. DIR_HDR_DB_CONFIGdbracprovRun Database Configuration Tools DIR_CRS_ROOT_ADD_NODE_DESCdbracprovThis step runs the root scripts that add the new nodes to the Grid Infrastructure. DIR_SETUP_ASM_HOME_DESCdbracprovThis step sets up the ASM Oracle Home location for the rest of the steps. DIR_BONDING_INTEFACES_MANUAL_DESCdbracprovSet up and configure Bonding Interfaces. (***requires root privileges***) PHASE_HDR_PREPARE_STAGEdbracprovPrepare Stage Area COMPUTE_LOAD_CLUSTER_DATA_NAMEdbracprovLoad runtime cluster data DIR_DESC_EXE_MANUAL_SUDO_REQdbracprovChecks if the user has permissions to execute sudo on remote nodes. If the user does not have enough permissions then the steps which require root privileges are skipped and respective manual steps are enabled. DIR_STAGE_ASM_CLONE_ZIP_NAMEdbracprovStage ASM Archive DIR_CRS_UPDATE_NODELIST_DESCdbracprovThis step will update the existing nodes of the cluster with the nodelist information of the new nodes. PHASE_DESC_DEPLOY_DBdbracprovThis phase prepares the database stage area on all the nodes. PHASE_BONDING_INTEFACES_DESCdbracprovConfigures Bonding Interfaces and customizes sysctl.conf (optional). DIR_HDR_REG_CRSdbracprovRegister Grid Infrastructure Home DIR_HDR_PREDB_CVUdbracprovPre-DB Install CVU Check DIR_RAC_ROOT_SCRIPTS_MANUAL_DESCdbracprovExecute the roots scripts from the Oracle Real Application Clusters Database home. (***requires root privileges***) PHASE_DESC_DEPLOY_CRSdbracprovThe software bits of Oracle Grid Infrastructure gets laid down on all the nodes. COMPUTE_AGENT_PUSH_NAMEdbracprovPush agents to new nodes REF_TGT_DESCdbracprovSelected reference target with Database that will be used for the extend. DIR_PREREQ_EXECUTION_NAMEdbracprovPrerequisite and Fixups execution DIR_CRS_ADD_NODE_NAMEdbracprovGrid Infrastructure Add node PHASE_HDR_SETUP_SSHdbracprovSSH Setup DIR_DESC_MOUNT_PREREQ_FIXUPdbracprovThis step sets up the Stage Area for running mount prerequisite checks and fixups on all nodes. It then runs the prerequisites and fix-ups. (***requires root privileges***) DIR_INSTALL_RPMS_MANUAL_DESCdbracprovInstall all packages from <Oracle Real Application Clusters Database Oracle Home>/sysman/prov/Cluster_packages directory copied from the reference node on all the nodes that need to be extended. If you use ocfs2, ensure that ocfs2, ocfs2-tools, and ocfs2-debug rpms for the cluster-specific OS and kernel are copied into this location. This step will install the same rpms on the new nodes when extending the cluster. Note: Ensure that you copy the rpms installed on the existing node into the <Oracle Real Application Clusters Database Oracle Home>/sysman/prov/Cluster_packages directory. Do not copy ocfs2 rpms for any other OS/kernel in this directory. (***requires root privileges***) PHASE_CRS_UPDATE_NODELIST_NAMEdbracprovGrid Infrastructure nodelist update STEP_DESC_UPDATE_MANUAL_CRSdbracprovExecute root scripts on the remaining nodes in the Grid Infrastructure. This step may fail if the nodes have already been removed from the Grid Infrastructure. Failure to execute this step will not cause the deployment procedure to fail. (***requires root privileges***) DIR_CRS_ROOT_SCRIPTS_NAMEdbracprovGrid Infrastructure Root scripts execution PHASE_OCFS2_NODE_SLOTS_CHECK_NAMEdbracprovocfs2 Node Slot Check STEP_DESC_REMOVE_NODES_FROM_CRSdbracprovRemoves the Node-level Applications from the Grid Infrastructure configuration for the nodes being deleted. PROCEDURE_NAME_UNIXdbracprovOracle Grid Infrastructure / Oracle Real Application Clusters Database Provisioning For UNIX STEP_DESC_VERIFY_CLUSTERWAREdbracprovRuns the Cluster Verification Utility (CVU) to check if the remaining nodes on the cluster are functioning properly. PHASE_DESC_VERIFY_CLUSTERWAREdbracprovIn case when the entire cluster is not being deleted, this verifies that the Grid Infrastructure is updated and the remaining nodes on the cluster are functioning properly. PHASE_INSTALL_RPMS_NAMEdbracprovInstall packages PROCEDURE_DESCdbracprovThis procedure assists in installing and configuring a cluster database (a Oracle Real Application Clusters - RAC database) on a selection of hosts as specified by the Oracle Database Oracle Grid Infrastructure and Oracle Real Application Clusters Installation Guide. PROCEDURE_NAME_WINdbracprovOracle Grid Infrastructure / Oracle Real Application Clusters Database Provisioning For Windows CRS_HOME_TGTS_DESCdbracprovList of targets that need CRS Oracle home setup. STEP_NAME_DELETE_ASM_HOMESdbracprovDe-install ASM DIR_PREPARE_CRS_CLONE_ZIP_NAMEdbracprovSource Grid Infrastructure Archive preparation PHASE_DESC_PREPARE_STAGEdbracprov DIR_SETUP_CRS_HOME_NAMEdbracprovSetup the Grid Infrastructure Oracle Home PHASE_CRS_USER_PERMISSION_CHECKS_DESCdbracprovExecutes the necessary prerequisites to check for user permissions on destination targets using Grid Infrastructure user. DIR_CLEAN_UP_NAMEdbracprovClean up step PHASE_NAME_UPDATE_NODELISTdbracprovUpdate Nodelist for Remaining Nodes PHASE_STAGE_PREREQ_NAMEdbracprovStage Prerequisites COPY_COPY_CRS_CLONE_ZIP_DESCdbracprovStep to copy the Grid Infrastructure source from the reference host to all the nodes that require the Grid Infrastructure installation. DIR_RAC_ADD_INSTANCE_DESCdbracprovOracle Real Application Clusters Database (RAC) instances will be created on the new nodes. DIR_DESC_REG_DBdbracprovThis step registers the Oracle Real Application Clusters Database target and ensures that the Oracle Real Application Clusters Database Home is recognised for ECM Collections. DIR_RAC_UPDATE_NODELIST_NAMEdbracprovOracle Home nodelist updation DIR_CONFIGURE_SYSCTL_MANUAL_DESCdbracprovCustomize sysctl.conf by updating IPV4 and kernel parameters. (***requires root privileges***) PHASE_DESC_PREREQdbracprovThe prerequisites and fix-ups are run on each of the nodes. PHASE_HDR_ROOTdbracprovRun Root Scripts PHASE_PRE_PREREQ_NAMEdbracprovPrepare for Extend Grid Infrastructure PHASE_ASM_UPDATE_NODELIST_DESCdbracprovIn this phase the nodelist information in the existing ASM homes are updated. PHASE_CRS_ZIP_DESCdbracprovThe Grid Infrastructure source from the reference target is archived in this step. DIR_DESC_EXE_CHECK_IF_FIXUP_REQdbracprovChecks if the nodes need to be fixed. PHASE_NAME_DELETE_NODESdbracprovDeconfigure Grid Infrastructure DIR_ASM_UPDATE_NODELIST_DESCdbracprovThis step will update the existing nodes with the nodelist information of the new nodes. PHASE_DESC_HOME_REGdbracprovRegister Grid Infrastructure Home with the Central Agent. DIR_HDR_INST_CVUQDISKdbracprovInstall CVUQDISK Package PHASE_HDR_HOME_REGdbracprovHome Registration DIR_DESC_DB_VERIFYdbracprovThis step runs the database verification utility on each nodes. DIR_OCFS2_NODE_SLOTS_CHECK_DESCdbracprovChecks ocfs2 volumes for availability of minimum number of node slots to perform the online extend. The number of slots for each ocfs2 disk must be greater than or equal to the total number of nodes in the resulting cluster. If the number of slots is lower, increase the number of slots by shutting down the stack on all nodes. For steps to increase the number of slots, see http://oss.oracle.com/projects/ocfs2/dist/documentation/ocfs2_users_guide.pdf. This step is executed only if you use ocfs2 format for shared disks. (***requires root privileges***) DIR_ADD_LISTENERS_NAMEdbracprovListener setup DIR_PREREQ_WIN_EXECUTION_NAMEdbracprovPrerequisites execution for windows PHASE_STAGE_CRS_CLONE_ZIP_DESCdbracprovThe Grid Infrastructure archive is copied to all the new nodes and staged to the Grid Infrastructure Oracle Home location. PHASE_DESC_CLEANUP_CLUSTER_FILESdbracprovCleans up cluster files from the nodes being deleted. DIR_PREREQ_ONLY_EXECUTION_NAMEdbracprovPrerequisite only step DIR_SETUP_SSH_DESCdbracprovSSH is established from each node to all the nodes of the resultant cluster for Grid Infrastructure install user. DIR_HDR_EXE_CHECK_IF_ADDINSTANCE_SUCCEEDEDdbracprovCheck if add instance was successful STEP_NAME_STOP_LISTENER_FROM_CRSdbracprovStop Listener Services PHASE_CRS_CLONE_NAMEdbracprovGrid Infrastructure cloning PHASE_STAGE_ASM_CLONE_ZIP_DESCdbracprovIn this phase the ASM archive is copied to the nodes that required ASM installation. Then it is staged to the ASM Oracle Home location. DIR_DESC_CHECK_IF_PORTS_FREEdbracprovChecks if the ports required for Oracle Real Application Cluster (RAC) Database add instance or enterprise manager configuration are free. PHASE_HDR_MOUNT_PREREQ_FIXUPdbracprovMount Prereqs and Fix-ups DIR_DESC_EC_EXE_PREREQ_CHECKSdbracprovExecutes the prerequisite checks on the nodes for extend. This step is performed on Unix platforms. This step may fail if one or more of the prerequisites are not met. Failure of this step does not cause the deployment procedure to fail. PHASE_ASM_CLONE_DESCdbracprovThis phase performs the cloning step required on the copied homes in the new nodes. STEP_NAME_DEINSTALLdbracprovDeinstall CRS DIR_HDR_EXE_PREREQ_CHECKSdbracprovExecute Prerequisite Checks DIR_CRS_CLONE_DESCdbracprovStep to clone the Grid Infrastructure oracle home on the new nodes. This will configure the home to the specific machine. DIR_RAC_ADD_INSTANCE_NAMEdbracprovOracle Real Application Cluster Database Add instance STEP_DESC_REMOVE_OCRdbracprovExecutes rootdeinstall script on the reference node in case of complete cluster deletion. (***requires root privileges***) PHASE_DESC_CVU_POSTdbracprovVerify Grid Infrastructure installation of hosts. PHASE_HDR_CVUdbracprovCluster Verification Utility DIR_DESC_REM_CVUQDISKdbracprovRemoves CVUQDISK package if found on the system. DIR_BONDING_INTEFACES_DESCdbracprovSets up and configures Bonding Interfaces. (***requires root privileges***) PHASE_HDR_DB_VERIFYdbracprovOracle Real Application Clusters Database Verification DIR_CRS_RACGONS_CONFIG_DESCdbracprovThis step executes the Grid Infrastructure configuration utilities. COPY_COPY_ASM_CLONE_ZIP_DESCdbracprovStep to copy the ASM source from the reference host to all the nodes that require the ASM installation. STEP_DESC_CLEANUP_NODESdbracprovCleans up the Grid Infrastructure configuration from the nodes being deleted. JOB_RAC_ADD_INSTANCE_NAMEdbracprovAdd Oracle Real Application Clusters Database Instance DIR_STAGE_PREREQ_DESCdbracprovStep to stage the prerequisite component to all the target nodes. PHASE_CLUSTER_INTROSPECTION_NAMEdbracprovCluster Introspection phase. DIR_CLONE_AGENT_TO_NODES_DESCdbracprovPropagate agent to the nodes not managed by Enterprise Manager. This will involve the copy of the archive followed by staging, cloning and required configuration. STEP_NAME_DELETE_NODES_FROM_CRSdbracprovDelete Nodes from Grid Infrastructure PHASE_OCFS2_CONFIG_UPDATE_NAMEdbracprovocfs2 Configuration update DIR_RAC_ADD_EMCA_INSTANCE_DESCdbracprovExecutes the Enterprise Manager configuration assistant for policy managed Oracle Real Application Clusters (RAC) Database. DIR_HDR_POST_CVUdbracprovPost-Install CVU Check DIR_STAGE_CRS_CLONE_ZIP_DESCdbracprovStep to stage the Grid Infrastructure archive file on nodes that require the Grid Infrastructure installation. PROCEDURE_NAMEdbracprovOracle Grid Infrastructure / Oracle Real Application Clusters Provisioning STEP_DESC_UPDATE_NODELISTdbracprovUpdates the nodelist on each home on the node. PHASE_RAC_UPDATE_NODELIST_DESCdbracprovIn this phase the nodelist information in the existing Oracle Real Application Cluster Database homes are updated. PHASE_NAME_VERIFY_CLUSTERWAREdbracprovVerify Grid Infrastructure DIR_DISCOVERY_DESCdbracprovThis step will perform a target discovery and register all the new targets with the Enterprise Manager. DIR_ASM_ROOT_SCRIPTS_DESCdbracprovThis step will execute the roots scripts from the ASM home. PHASE_HDR_CRS_CONFdbracprovCluster Configuration PHASE_ASM_UPDATE_NODELIST_NAMEdbracprovASM nodelist update DIR_CLEAN_UP_DESCdbracprovCleans up working directories and temporary files from all the nodes. DIR_CONFIGURE_SYSCTL_DESCdbracprovAllows customization of sysctl.conf by updating IPV4 and kernel parameters. (***requires root privileges***) STEP_NAME_REMOVE_ORCL_CLUSTERdbracprovDelete ORCLcluster file OCM_CONFIG_JOB_NAMEdbracprovConfigure Oracle home DIR_PREPARE_RAC_CLONE_ZIP_NAMEdbracprovSource Oracle Real Application Clusters Archive preparation DIR_PREPARE_ASM_CLONE_ZIP_DESCdbracprovStep to prepare a archive file of the ASM Oracle home from the selected reference host of the existing cluster database. PHASE_HDR_CLEAN_CRSdbracprovClean up Grid Infrastructure Stage Area DIR_HDR_CREATE_DIR_DESCdbracprovCreates first-level directories under /. (***requires root privileges***) PHASE_CLEAN_UP_NAMEdbracprovClean Up PHASE_DESC_INITIALIZATIONdbracprovInitializes the runtime and verfies the state of the Grid Infrastructure services. DIR_SETUP_RAC_HOME_DESCdbracprovThis step sets up the Oracle Real Application Clusters Database Oracle Home location for the rest of the steps. STEP_NAME_RE_READ_INITTABdbracprovRe-read Inittab DIR_CRS_ADD_NODE_DESCdbracprovAdds the new nodes to the existing Grid Infrastructure. PHASE_ASM_CLONE_NAMEdbracprovASM cloning DIR_DESC_EC_VERIFY_FIXESdbracprovExecutes the prerequisite checks on the nodes to extend. Any failure in this step indicates that one or more prerequisite checks have not been fixed automatically and require manual intervention. It is recommended that you fix the problem and then retry this step in the failed nodes. This step is performed on Unix operating systems and is skipped if the 'Execute Prerequisite Checks' step is disabled or if execution is successful. DIR_INSTALL_RPMS_NAMEdbracprovInstall packages DIR_HDR_EXE_CHECK_IF_MANUAL_SUDO_REQdbracprovCheck if steps which require root privileges can be enabled. STEP_NAME_DELETE_DB_HOMESdbracprovDe-install Database PHASE_RAC_ADD_NODE_DESCdbracprovPhase in which the Oracle Real Application Cluster Database target(s) are added on the new nodes. PHASE_DESC_CVU_READYdbracprovVerify Cluster readiness of hosts PHASE_NAME_INITIALIZATIONdbracprovInitialization Phase PHASE_STAGE_ASM_CLONE_ZIP_NAMEdbracprovCopy and Stage the ASM Archive DIR_DESC_DB_CONFIGdbracprovThis step runs database config tools on the first node. PHASE_DESC_PREPARE_DB_STAGEdbracprovThis phase prepares the database stage area on all the nodes. PHASE_DESC_DELETE_NODESdbracprovDeconfigures Grid Infrastructure on the nodes being deleted. DIR_HDR_REM_CVUQDISKdbracprovRemove CVUQDISK Package DIR_SETUP_SSH_NAMEdbracprovSetup SSH for Grid Infrastructure User PHASE_NAME_REMOVE_OCRdbracprovCleanup Grid Infrastructure Registry PHASE_RAC_ZIP_NAMEdbracprovOracle Real Application Cluster Database Archive creation DIR_DESC_EXE_CHECK_IF_ADDINSTANCE_SUCCEEDEDdbracprovCheck if Add Instance operation was successfully completed on all of the remote nodes. DIR_HDR_VERIFY_FIXESdbracprovVerify Prerequisite Checks DIR_DESC_CLEANUP_CRSdbracprovThis step runs a script that cleans up the temperorary Grid Infrastructure stage area that was set up for Grid Infrastructure install. PHASE_HDR_INST_CVUQDISKdbracprovInstall CVUQDISK Package DIR_RAC_ROOT_SCRIPTS_DESCdbracprovExecutes the roots scripts from the Oracle Real Application Clusters Database home. (***requires root privileges***) DIR_SETUP_CRS_HOME_DESCdbracprovThis step sets up the Grid Infrastructure Oracle Home location for the rest of the steps. PHASE_ASM_ROOT_SCRIPTS_NAMEdbracprovASM root scripts PHASE_CRS_RACGONS_CONFIG_DESCdbracprovThe Grid Infrastructure configuration tools are executed in this phase that configures the new nodes to the cluster. DIR_UPDATE_CRS_MANUAL_TEXTdbracprovUsing root privileges, execute <Grid Infrastructure Oracle Home>/crs/install/rootcrs.pl -delete -force on all the nodes to be scaled down, to deconfigure Grid services from the nodes. PHASE_DESC_SETUP_SSHdbracprov DIR_CRS_ROOT_SCRIPTS_DESCdbracprovThis step is performed on the new nodes to bring up the Grid Infrastructure daemons on the new nodes. (***requires root privileges***) DIR_HDR_REG_DBdbracprovRegister Oracle Real Application Clusters Database Home DIR_HDR_CLEANUP_CRSdbracprovCleanup Grid Infrastructure Stage Area DIR_HDR_MOUNT_PREREQ_FIXUPdbracprovMount Prereq Fixup execution PHASE_STAGE_RAC_CLONE_ZIP_NAMEdbracprovStage Oracle Real Application Cluster Database archive PHASE_RAC_ROOT_SCRIPTS_NAMEdbracprovOracle Real Application Cluster Database root scripts PHASE_ADD_LISTENER_DESCdbracprovAdds Oracle Real Application Clusters (RAC) instance on the new nodes. PHASE_DISCOVERY_DESCdbracprovPhase to discover the new targets that have been brought up on the new nodes. STEP_REF_HOST_SANITY_NAMEdbracprovReference Host Sanity Check PHASE_RAC_CLONE_DESCdbracprovThis phase performs the add node step of the Oracle Real Application Cluster Database Oracle Home on the new nodes. COPY_COPY_RAC_CLONE_ZIP_DESCdbracprovStep to copy the Oracle Real Application Clusters Database source from the reference host to all the nodes that require the ASM installation. DIR_STAGE_ASM_CLONE_ZIP_DESCdbracprovStep to stage the ASM zipfile on nodes that require the Grid Infrastructure installation. DIR_DESC_INSTALL_DBdbracprovThis step lays down Oracle database software bits. DIR_ATTACH_HOME_NAMEdbracprovAttach home to central inventory DIR_HDR_SETUP_SSHdbracprovSSH Setup DIR_OCFS2_LOAD_DESCdbracprovLoads the ocfs2 drivers and starts ocfs2 on new nodes. (***requires root privileges***) DIR_HDR_SETUP_DB_STAGEdbracprovSetup Database Stage Area DIR_DESC_VERIFY_SHARED_LOCdbracprovThis step runs the cluster verification utility to check if the shared locations are accessible from all the target nodes. PHASE_DESC_INIT_CRSdbracprovExecutes the rootdeletenode scripts on the existing nodes in the Grid Infrastructure. Performing this step ensures that files remaining after an incomplete deletion of Grid Infrastructure will be cleaned up. (***requires root privileges***) PHASE_RAC_ROOT_SCRIPTS_DESCdbracprovOracle Real Application Cluster Database root scripts are executed. PHASE_OCFS2_LOAD_NAMEdbracprovCopy configuration and load ocfs2 PHASE_CRS_ROOT_SCRIPTS_NAMEdbracprovGrid Infrastructure root scripts DIR_DESC_EXE_CHECK_IF_CRS_HOME_TO_BE_REMOVEDdbracprovChecks if root delete node script was successful. DIR_ADD_LISTENERS_DESCdbracprovPerforms the listener setup to bring up the listeners on the new nodes. PHASE_HDR_DB_CONFdbracprovDatabase Configuration DIR_DEINST_CVUQDISK_MANUAL_TEXTdbracprovUsing root privileges, remove CVUQDISK package from the system. DIR_RAC_ROOT_SCRIPTS_MANUAL_TEXTdbracprovUsing root privileges, execute Oracle Real Application Clusters Database Oracle home/root.sh on the nodes to be extended. After all the root scripts are executed on all the nodes successfully, select the manual step and click Continue to proceed with the Deployment Procedure execution. DIR_SETUP_RAC_SSH_NAMEdbracprovSetup SSH for Oracle Real Application Cluster Database User PHASE_DESC_UPDATE_NODELISTdbracprovUpdates the nodelist for the remaining nodes on the cluster. STEP_DESC_UPDATE_INVENTORYdbracprovUpdates the central inventory in the nodes being deleted. PHASE_RAC_CONFIG_NAMEdbracprovOracle Real Application Cluster Database Configuration PHASE_DESC_PREP_CLUSTERWAREdbracprovRemoves the nodes from the Grid Infrastructure. Performing this step ensures that files remaining after an incomplete deletion of Grid Infrastructure are cleaned up. This step may fail if the nodes have already been removed from the Grid Infrastructure. Failure of this step does not cause the deployment procedure to fail. (***requires root privileges***) PHASE_PRE_PREREQ_DESCdbracprovThis phase executes the steps to be run before the prerequisites required on the Grid Infrastructure target using the Grid Infrastructure user credentials. STEP_NAME_DELETE_INSTANCEdbracprovDelete All Instances PHASE_RAC_CONFIG_DESCdbracprovIn this phase we execute the configuration tools required on the Oracle Real Application Cluster database home using the Cluster Database home credentials. PHASE_HDR_PREPARE_DB_STAGEdbracprovPrepare Database Stage Area DIR_HDR_EXE_CHECK_IF_CRS_HOME_TO_BE_REMOVEDdbracprovCheck if root delete node script was successful PHASE_HDR_PREP_CLUSTERWAREdbracprovPrepare Grid Infrastructure locations VERIFY_STAGE_LOC_PERMISSION_HOST_CMD_STEP_DESCdbracprovChecks if Staging Area Path is writable. PROCEDURE_NAME_DBDNdbracprovScale down Oracle Real Application Clusters COPY_COPY_RAC_CLONE_ZIP_NAMEdbracprovCopy Oracle Real Application Clusters Database Archive DIR_AGENT_ZIP_COPY_NAMEdbracprovAgent archive preparation COPY_COPY_RPMS_NAMEdbracprovCopy packages DIR_HDR_REG_CRS_NAMEdbracprovGrid Infrastructure home registration STEP_NAME_CLEANUP_NODESdbracprovCleanup Grid Infrastructure DIR_DESC_REM_MANUAL_CVUQDISKdbracprovRemove CVUQDISK package if found on the system. PHASE_RAC_UPDATE_NODELIST_NAMEdbracprovOracle Real Application Clusters Databse nodelist update DIR_STAGE_PREREQ_NAMEdbracprovStage Prerequisite component STEP_DESC_RE_READ_INITTABdbracprovRe-reads /etc/inittab file in the OS. (***requires root privileges***) PHASE_HDR_FORMAT_OCFSdbracprovFormat OCFS Partitions STEP_DESC_DELETE_ASM_HOMESdbracprovDe-installs ASM from the nodes being deleted. PHASE_CRS_ADD_NODE_NAMEdbracprovGrid Infrastructure add node PHASE_NAME_CLEANUP_SOFTWAREdbracprovCleanup Software STEP_REF_HOST_SANITY_DESCdbracprovChecks the validity of state directories on the Database home. DIR_CLUSTER_INTROSPECTION_DESCdbracprovStep to obtain the locations of shared storage and database files of the selected cluster database. DIR_PREREQ_EXECUTION_DESCdbracprovStep to execute the prerequisite checks on the nodes for extend. Fixups will be executed for failed prerequisites. DIR_DESC_ROOTdbracprovThis step runs oraInstroot.sh and root.sh. DIR_CRS_ROOT_ADD_NODE_NAMEdbracprovGrid Infrastructure Root Add node DIR_PREREQ_ONLY_EXECUTION_DESCdbracprovStep to execute the prerequisites only. This step does not perform any of the automated fixups. This step also runs the cluster verification utility (CVU). This step can be enabled if prerequisites only needs to be run as part of the phase. STEP_NAME_UPDATE_NODELISTdbracprovUpdate Nodelist DIR_PREPARE_RAC_CLONE_ZIP_DESCdbracprovStep to prepare a zipfile of the Oracle Real Application Clusters Database Oracle home from the selected reference host of the existing cluster database. DIR_BONDING_INTEFACES_NAMEdbracprovBonding Interface Configuration PHASE_POST_PREREQ_NAMEdbracprovExtend Grid Infrastructure PHASE_DESC_FORMAT_OCFSdbracprovUtility to format OCFS partition. PHASE_CRS_ZIP_NAMEdbracprovGrid Infrastructure Archive creation DIR_ASM_UPDATE_NODELIST_NAMEdbracprovASM home nodelist updation DIR_DESC_CLEANUP_DBdbracprovThis step runs a script that cleans up the temperorary database stage area that was set up for database install. PHASE_EMCA_INSTANCE_DESCdbracprovConfigures Enterprise Manager for Policy Managed Oracle Real Application Clusters (RAC) Database on the new nodes. PHASE_DESC_CLEANUP_SOFTWAREdbracprovCleans up the software from the nodes being deleted. DIR_RAC_ADD_EMCA_INSTANCE_NAMEdbracprovEnterprise Manager configuration for Oracle Real Application Clusters (RAC) Database DIR_DESC_REFRESHdbracprovUploads the latest configuration of the hosts to the Oracle Management Server. PHASE_BONDING_INTEFACES_NAMEdbracprovBonding and Sysctl Configuration PHASE_RAC_ZIP_DESCdbracprovThe Oracle Real Application Cluster Database source from the reference target is archived as part of this step. PHASE_OCFS2_CONFIG_UPDATE_DESCdbracprovRuns on nodes with ocfs2 configured to update /etc/ocfs2/cluster.conf with information about the new nodes. This step is executed only when shared storage on ocfs2 needs to be extended to new nodes. DIR_OCFS2_UPDATE_DESCdbracprovUpdates /etc/ocfs2/cluster.conf on the ocfs2 configured nodes with information about the new nodes. (***requires root privileges***) PHASE_HDR_DEPLOY_CRSdbracprovDeploy Oracle Grid Infrastructure COMPUTE_INIT_DP_DESCdbracprovInitializes the current Deployment Procedure execution. Derived variables are set with computations. Do not disable or delete this step. DIR_OCFS2_LOAD_NAMEdbracprovOcfs2 Load and Configure VERIFY_STAGE_LOC_PERMISSION_HOST_CMD_STEPdbracprovChecks if Staging Area Path is writable PHASE_STAGE_PREREQ_DESCdbracprovThe prerequisite and fixup component is staged in this phase. DIR_INST_CVUQDISK_MANUAL_TEXTdbracprovUsing root privileges, install CVUQDISK package available in the <Grid Infrastructure Oracle Home>/cv/rpm directory, if not already installed. DIR_INSTALL_RPMS_DESCdbracprovInstalls all packages from <Oracle Real Application Cluster Database Oracle Home>/sysman/prov/Cluster_packages directory copied from the reference node on all the nodes that need to be extended. If you use ocfs2, ensure that the ocfs2, ocfs2-tools, and ocfs2-debug rpms for the cluster-specific OS and kernel are copied into this location. This step will install the same rpms on the new nodes when extending the cluster. Note: Ensure that you copy the rpms installed on the existing node into the <Oracle Real Application Cluster Database Oracle Home>/sysman/prov/Cluster_packages directory. Do not copy ocfs2 rpms for any other OS/kernel in this directory. (***requires root privileges***) PHASE_RAC_USER_PERMISSION_CHECKS_DESCdbracprovExecutes the necessary prerequisites to check for user permissions on destination targets using Oracle Real Application Clusters (RAC) Database user. PROCEDURE_DESC_DBDNdbracprovThis procedure deletes nodes from Oracle Real Application Clusters in order to scale down the cluster. PHASE_DESC_VERIFY_SHARED_LOCdbracprovUtility to verify shared devices STEP_NAME_REMOVE_NODEAPPS_FROM_CRSdbracprovRemove Node-level Applications from Grid Infrastructure PHASE_RAC_ADD_INSTANCE_DESCdbracprovIn this phase the Oracle Real Application Cluster Database instances are added on the new nodes. DIR_DESC_PREP_CLUSTERWAREdbracprovRemoves the nodes from the Grid Infrastructure. Performing this step ensures that files remaining after an incomplete deletion of Grid Infrastructure will be cleaned up. This step may fail if the nodes have already been removed from the Grid Infrastructure. Failure to execute this step will not cause the deployment procedure to fail. (***requires root privileges***) PROCEDURE_NAME_DBECdbracprovOne Click Extend Cluster Database PHASE_OCFS2_NODE_SLOTS_CHECK_DESCdbracprovChecks ocfs2 node slots availability. This step is executed only when shared storage on ocfs2 needs to be extended to new nodes. ASM_HOME_TGTS_DESCdbracprovList of targets that need ASM Oracle home setup. PHASE_ADD_LISTENER_NAMEdbracprovAdd Oracle Real Application Clusters (RAC) instance DIR_RAC_ADD_NODE_DESCdbracprovStep to add the new nodes to the existing Oracle Real Application Clusters Database(s). In case of a GPnP cluster, all the Oracle Real Application Clusters targets shall be added to the new node(s) in a loop. STEP_DESC_REMOVE_CLUSTER_FILESdbracprovDeletes cluster files from the OS. (***requires root privileges***) STEP_DESC_DELETE_DB_HOMESdbracprovDe-installs the Oracle Real Application Cluster Database from the nodes being deleted. PHASE_HDR_DEPLOY_DBdbracprovDeploy Oracle Database PHASE_NAME_DELETE_CONFIGdbracprovDelete Configuration PHASE_EMCA_INSTANCE_NAMEdbracprovEnterprise Manager configuration DIR_DESC_INST_MANUAL_CVUQDISKdbracprovInstall CVUQDISK package if not found on the system. (***requires root privileges***) DIR_HDR_SETUP_STAGEdbracprovSetup Stage Area DIR_STAGE_RAC_CLONE_ZIP_NAMEdbracprovStage Oracle Real Application Clusters Database Archive DIR_SETUP_RAC_SSH_DESCdbracprovSSH is established from each node to all the nodes of the resultant cluster for Oracle Real Application Cluster Database install user. DIR_RAC_ROOT_SCRIPTS_NAMEdbracprovOracle Real Application Clusters Database Root scripts execution STEP_NAME_VERIFY_CLUSTERWAREdbracprovVerify Grid Infrastructure for Remaining Nodes PHASE_AGENT_ZIP_COPY_DESCdbracprovIn this phase monitoring agents are pushed to nodes that are not managed by the Enterprise Manager. PHASE_STAGE_CRS_CLONE_ZIP_NAMEdbracprovCopy and stage the Grid Infrastructure archive to new nodes DIR_DESC_SETUP_DB_STAGEdbracprovThis step sets up the Stage Area for a database install. DIR_RAC_CLONE_DESCdbracprovAdds node of the Oracle Real Application Clusters Database Oracle home on the new nodes. This configures the home to the specific machine. DIR_HDR_EXE_CHECK_IF_ADDNODE_SUCCEEDEDdbracprovCheck if add node was successful DIR_ASM_CLONE_NAMEdbracprovASM Home Cloning PHASE_DESC_CLEANUP_NODESdbracprovThis does the necessary clean up operations like removing ONS daemon configurations and unregistering listener services. DIR_SETUP_RAC_HOME_NAMEdbracprovSetup the Oracle Real Application Clusters Database Oracle Home COPY_COPY_ASM_CLONE_ZIP_NAMEdbracprovCopy ASM Archive PHASE_ASM_ZIP_DESCdbracprovThe ASM source from the reference target is archived as part of this step. PHASE_CRS_ROOT_SCRIPTS_DESCdbracprovGrid Infrastructure root scripts are executed. VERIFY_DISK_HOST_CMD_STEPdbracprovChecks if disk is usable DIR_DESC_EXE_FIXUPdbracprovPerforms system level fixes based on the prerequisite check failures in the previous step. This step is performed on Unix operating systems. This step is skipped if the 'Execute Prerequisite Checks' step is disabled or if execution is successful. (***requires root privileges***) DIR_HDR_PREP_CREATE_DIRdbracprovPrepare Create directory DIR_HDR_DB_VERIFYdbracprovOracle Real Application Clusters Database Verification Run DIR_CLONE_AGENT_TO_NODES_NAMEdbracprovAgent archive copy and stage followed by cloning DIR_EXE_FIXUP_MANUAL_TEXTdbracprovUsing root privileges, perform the fixups for the failed prerequisites using runFixup.sh available in the working directory. This step is skipped if the 'Execute Prerequisite Checks' step is disabled or if execution is successful. Once the fixups are executed, select the manual step and click Continue to proceed with the Deployment Procedure execution. DIR_HDR_REFRESHdbracprovRefresh Host Configuration DIR_BONDING_INTERFACES_MANUAL_TEXTdbracprovUsing root privileges, configure the bonding interfaces on all new nodes to be extended. After configuring the bonding interfaces, select the manual step and click Continue to proceed with the Deployment Procedure execution. PHASE_CRS_UPDATE_NODELIST_DESCdbracprovIn this phase the nodelist information in the existing Grid Infrastructure homes are updated. PHASE_SANITY_CHECKdbracprovReference Host Sanity Check. PHASE_DESC_UPDATE_CRSdbracprovUpdates Grid Infrastructure on the remaining nodes. DIR_ASM_ROOT_SCRIPTS_NAMEdbracprovASM Root scripts execution DIR_ASM_DISK_SETUP_DESCdbracprovThis step configures block devices and ensures appropriate ownership of devices. DIR_RAC_ADD_NODE_NAMEdbracprovOracle Real Application Clusters Add node DIR_SETUP_ASM_HOME_NAMEdbracprovSetup the ASM Oracle Home PHASE_OCFS2_LOAD_DESCdbracprovCopies /etc/ocfs2/cluster.conf to new hosts and loads ocfs2 drivers. This step is executed only when shared storage on ocfs2 needs to be extended to new nodes. DIR_CONFIGURE_SYSCTL_MANUAL_TEXTdbracprovUsing root privileges, copy /etc/sysctl.conf from the reference node to all the nodes to be extended. Execute /sbin/sysctl -p /etc/sysctl.conf on all nodes to be extended. After configuring sysctl, select the manual step and click Continue to proceed with the Deployment Procedure execution. DIR_AGENT_ZIP_COPY_DESCdbracprovStep to prepare a archive of the agent on the reference target machine. DIR_RAC_CLONE_NAMEdbracprovOracle Real Application Clusters Database Home Add Node PHASE_COPY_RPMS_NAMEdbracprovCopy packages DIR_DESC_FORMAT_OCFSdbracprovThis step formats OCFS partitions if required. PHASE_INSTALL_RPMS_DESCdbracprovInstalls rpm packages copied from the reference node. This step will be run only on linux hosts. DIR_HDR_ROOTdbracprovRoot Scripts DIR_OCFS2_LOAD_MANUAL_TEXTdbracprovUsing root privileges, do the following: Backup the existing /etc/ocfs2/cluster.conf, if any, on the nodes to be extended. Copy /etc/ocfs2/cluster.conf from the reference node to /etc/ocfs2/ directory on all the nodes to be extended. Execute /sbin/chkconfig multipathd on all the nodes to be extended. Execute /etc/init.d/o2cb load on all the nodes to be extended. Execute /etc/init.d/o2cb online on all the nodes to be extended. These steps will configure and load OCFS2 on all the new nodes to be extended. After configuring OCFS2, select the manual step and click Continue to proceed with the Deployment Procedure execution. PHASE_CLEAN_UP_DESCdbracprovCleans up phase to purge the work directories and temporary files. OCM_CONFIG_JOB_DESCdbracprovInstalls and initiates configuration manager for security updates. PHASE_DESC_CLEAN_CRSdbracprov DIR_STAGE_CRS_CLONE_ZIP_NAMEdbracprovStage Grid Infrastructure Archive PHASE_HDR_VERIFY_SHARED_LOCdbracprovVerify Shared Locations PHASE_CLUSTER_INTROSPECTION_DESCdbracprovThe phase executes the cluster introspection utility on the reference target. DIR_FSTAB_COPY_DESCdbracprovCopies /etc/fstab from reference node to new nodes COMPUTE_LOAD_CLUSTER_DATA_DESCdbracprovStep to analyse the result of the cluster introspection step and load the results into the run time data. DIR_DESC_INST_CVUQDISKdbracprovInstalls CVUQDISK package if not found on the system. (***requires root privileges***) COPY_COPY_RPMS_DESCdbracprovCopies all packages from &lt;Oracle Real Application Cluster Database Oracle Home>/sysman/prov/Cluster_packages directory on the reference node to all nodes that need to be extended. To install a consistent set of packages and rpms on all nodes of the cluster, create the directory &lt;Oracle Real Application Cluster Database Oracle Home>/sysman/prov/Cluster_packages on existing nodes of the cluster. If you use ocfs2, ensure that ocfs2, ocfs2-tools, and ocfs2-debug rpms for cluster-specific OS and kernel are copied into this location. Note: Copy the rpms installed on the existing node into the &lt;Oracle Real Application Cluster Database Oracle Home>/sysman/prov/Cluster_packages directory. Do not copy ocfs2 rpms for any other OS/ kernel in this directory. DIR_CONFIGURE_SYSCTL_NAMEdbracprovSysctl Configuration STEP_DESC_DELETE_INSTANCEdbracprovRemoves all instances and listeners from all Oracle Real Application Cluster Database homes on the nodes to be deleted. DIR_OCFS2_LOAD_MANUAL_DESCdbracprovLoad the ocfs2 drivers and start ocfs2 on new nodes. (***requires root privileges***) STEP_DESC_STOP_ASM_FROM_CRSdbracprovStops ASM services in the Grid Infrastructure for the nodes being deleted. PHASE_COPY_RPMS_DESCdbracprovCopies rpm packages from reference node to all nodes that need to be extended. This step will be run only on linux hosts. DIR_HDR_CRS_CONFIGdbracprovRun Cluster Configuration Tools PHASE_DESC_DELETE_DB_HOMESdbracprovDeletes database homes from the node(s) being deleted. DIR_FSTAB_COPY_MOUNT_NAMEdbracprovCopy fstab and mount PHASE_HDR_CLEAN_DBdbracprovClean up Database Stage Area PHASE_NAME_CLEANUP_CLUSTER_FILESdbracprovCluster Files Cleanup PHASE_DISCOVERY_NAMEdbracprovTargets Discovery phase PHASE_RAC_CLONE_NAMEdbracprovOracle Real Application Cluster Database Add Node PHASE_CRS_CLONE_DESCdbracprovThis phase performs the cloning step required on the copied homes of the new nodes. DIR_DESC_CRS_CONFIGdbracprovThis step runs Grid Infrastructure config tools on the first node. DIR_DESC_SETUP_SSHdbracprovSSH would be setup from first node to the remaining nodes of the cluster. PHASE_RAC_ADD_NODE_NAMEdbracprovOracle Real Application Cluster Database add node PHASE_HDR_PREREQdbracprovPrerequisites and Fix-ups DIR_STAGE_RAC_CLONE_ZIP_DESCdbracprovStep to stage the Oracle Real Application Clusters Database zipfile on nodes that require the Grid Infrastructure installation. COMPUTE_INIT_DP_NAMEdbracprovInitialize Deployment Procedure STEP_DESC_DELETE_NODES_FROM_CRSdbracprovRemoves the nodes from the Grid Infrastructure. (***requires root privileges***) PHASE_DESC_MOUNT_PREREQ_FIXUPdbracprovIn this phase the mount prereqs and fix-ups are run on each of the nodes. PHASE_NAME_CLEANUP_NODESdbracprovCleanup Nodes DIR_DESC_PRE_CVUdbracprovRuns the cluster verification utility to check the preparedness of the cluster. VERIFY_SUDO_ACCESS_HOST_CMD_STEP_DESCdbracprovChecks for sudo permission. (***requires root privileges***) DIR_OCFS2_NODE_SLOTS_CHECK_NAMEdbracprovocfs2 Node Slot Check DIR_ATTACH_HOME_DESCdbracprovRegisters the home with the central inventory. This is special step for a shared home case since cloning is not required. The home is already shared and available on the nodes. COPY_COPY_CRS_CLONE_ZIP_NAMEdbracprovSource Grid Infrastructure Archive copy CLUSTER_TGTS_DESCdbracprovList of nodes that are part of the selected cluster. STEP_DESC_VERIFY_CLUSTERWARE_ALL_SERVSdbracprovVerifies the state of the Grid Infrastructure services. Do not disable or delete this step. This step may fail if any of the services are unavailable. Failure to execute this step will not cause the deployment procedure to fail. DIR_INSTALL_RPMS_MANUAL_TEXTdbracprovUsing root privileges, install all rpm packages available in the directory Oracle Real Application Cluster Database Oracle Home/sysman/prov/Cluster_packages using the command rpm -ivh rpm_package_name on all the nodes that need to be extended. If you use ocfs2, ensure that ocfs2, ocfs2-tools, and ocfs2-debug rpms for the cluster-specific OS and kernel are also installed. Do not install ocfs2 rpms for any other OS/kernel on the nodes. After installing the packages, select the manual step and click Continue to proceed with the Deployment Procedure execution. COMPUTE_AGENT_PUSH_DESCdbracprovStep to push the monitoring agents to nodes that are not managed by the Oracle Enterprise Manager. STEP_DESC_UPDATE_CRSdbracprovExecutes rootdeletenode scripts on the remaining nodes in the Grid Infrastructure. This step may fail if the nodes have already been removed from the Grid Infrastructure. Failure to execute this step will not cause the deployment procedure to fail. (***requires root privileges***) PHASE_RAC_ADD_INSTANCE_NAMEdbracprovOracle Real Application Cluster Database Add instance DIR_HDR_VERIFY_SHARED_LOCdbracprovCVU Run to verify shared locations PHASE_ASM_ZIP_NAMEdbracprovASM Archive creation DIR_DESC_POST_CVUdbracprovThis step runs the cluster verification utility to verify a Grid Infrastructure installation. DIR_HDR_EXE_CHECK_IF_FIXUP_REQdbracprovCheck if Fixes are Required DIR_CRS_CLONE_NAMEdbracprovGrid Infrastructure Home Cloning STEP_NAME_UPDATE_CRSdbracprovUpdate Nodes DIR_DESC_PREP_CREATE_DIR_DESCdbracprovPrepares list of first-level directories to be created under / . Do not disable or delete this step. JOB_RAC_ADD_INSTANCE_DESCdbracprovStep to add the Oracle Real Application Clusters Database instances on the new nodes. This step will be executed only if it is a non-GPnP cluster where only one Oracle Real Application Clusters Database target shall be extended. In case of a GPnP cluster this step shall be disabled. PHASE_RAC_USER_PERMISSION_CHECKSdbracprovOracle Real Application Cluster (RAC) User Permission Checks PHASE_DESC_ROOTdbracprov PHASE_AGENT_ZIP_COPY_NAMEdbracprovPush agents to nodes. PHASE_NAME_UPDATE_CRSdbracprovUpdate Grid Infrastructure PHASE_HDR_INIT_CRSdbracprovInitialize Grid Infrastructure PHASE_ASM_ROOT_SCRIPTS_DESCdbracprovASM root scripts are executed. DIR_CLUSTER_INTROSPECTION_NAMEdbracprovSelected Cluster Introspection DIR_CRS_UPDATE_NODELIST_NAMEdbracprovGrid Infrastructure nodelist updation CRS_HOME_ONE_TGT_DESCdbracprovOne node on which CRS Oracle home setup needed. STEP_NAME_VERIFY_CLUSTERWARE_ALL_SERVSdbracprovVerification PHASE_DESC_DELETE_CONFIGdbracprovDeletes instances from the selected nodes and updates the cluster configuration. STEP_NAME_STOP_ASM_FROM_CRSdbracprovStop ASM Services DIR_PREREQ_WIN_EXECUTION_DESCdbracprovExecutes the prerequisite checks on the nodes for the extendoperation. This step is enabled for windows platforms. PHASE_HDR_CVU_POSTdbracprovCluster Verification Utility Post Grid Infrastructure Install DIR_HDR_INSTALL_DBdbracprovInstall Oracle Database DIR_HDR_EXE_FIXUPdbracprovExecute System Fixes DIR_HDR_REG_DB_DESCdbracprovThe Oracle Real Application Clusters Database Oracle homes installed on the selected targets are registered with the agent inventory that manages the node. DIR_DISCOVERY_NAMEdbracprovTargets Discovery step DIR_HDR_CHECK_IF_PORTS_FREEdbracprovChecks if the required ports are free DIR_CRS_ROOT_SCRIPTS_MANUAL_DESCdbracprovPerform this step on the new nodes to bring up the Grid Infrastructure daemons on the new nodes. (***requires root privileges***) PHASE_POST_PREREQ_DESCdbracprovThis phase executes the steps required on the Grid Infrastructure target(s) using the Grid Infrastructure user credentials. STEP_DESC_REMOVE_ORCL_CLUSTERdbracprovDeletes ORCLcluster from the nodes being deleted. This step is not executed if the user has 9i Clusters. (***requires root privileges***) VERIFY_DISK_HOST_CMD_STEP_DESCdbracprovChecks if disk is usable DIR_ASM_DISK_SETUP_NAMEdbracprovSetup up ASM block devices PHASE_SANITY_CHECK_DESCdbracprovPerforms the sanity check on the reference node. PHASE_NAME_DELETE_DB_HOMESdbracprovDelete Database Homes DIR_DESC_EXE_MANUAL_FIXUPdbracprovPerform system level fixes based on the prerequisite check failures in the previous step. Perform this step only on Unix operating systems. Skip this step if the 'Execute Prerequisite Checks' step is disabled or if execution is successful. (***requires root privileges***) DIR_FSTAB_COPY_MOUNT_DESCdbracprovCopies the fstab file from work directory to /etc directory and mount all volumes from fstab. This step is executed only if you use ocfs2 format for shared disks. (***requires root privileges***) ALL_TGTS_DESCdbracprovList of nodes with selected Database for extend and the selected target nodes for extend. DIR_RAC_UPDATE_NODELIST_DESCdbracprovThis step will update the existing nodes with the nodelist information on the new nodes. STEP_DESC_STOP_LISTENER_FROM_CRSdbracprovStops listener services in the Grid Infrastructure for the nodes being deleted. PHASE_CRS_USER_PERMISSION_CHECKSdbracprovGrid Infrastructure User Permission Checks DIR_DESC_SETUP_STAGEdbracprovThis step sets up the stage area and copies the prereq and fixup scripts. RAC_HOME_TGTS_DESCdbracprovList of targets that need Oracle Real Application Clusters Oracle home setup. PHASE_NAME_DELETE_ASM_HOMESdbracprovDelete ASM Homes PROCEDURE_TYPEdbracprovOracle Real Application Clusters Database Provision DIR_HDR_REG_DB_NAMEdbracprovOracle Real Application Clusters Database Oracle home registration DIR_HDR_CLEANUP_DBdbracprovCleanup Database Stage Area PHASE_CRS_ADD_NODE_DESCdbracprovPhase in which the Grid Infrastructure targets are added on the new nodes. STEP_DESC_DEINSTALLdbracprovDeinstalls CRS software from the nodes being deleted. DIR_OCFS2_COPY_DESCdbracprovCopies /etc/ocfs2/cluster.conf from reference node to new nodes PHASE_DESC_DB_CONFdbracprovThe database config tools are run in this phase on the first node. DIR_HDR_INSTALL_CRSdbracprovInstall Oracle Grid Infrastructure DIR_HDR_PRE_CVUdbracprovPre-Install CVU Check VERIFY_SUDO_ACCESS_HOST_CMD_STEPdbracprovChecks for sudo permission DIR_DESC_REG_CRS_DESCdbracprovThe Grid Infrastructure homes installed on the selected targets are registered with the agent inventory that manages the node. DIR_DESC_EXE_CHECK_IF_ADDNODE_SUCCEEDEDdbracprovChecks if Add Node operation was successfully completed on the remote nodes. STEP_NAME_REMOVE_CLUSTER_FILESdbracprovDelete Cluster Files PHASE_DESC_CRS_CONFdbracprovThe Grid Infrastructure config tools are run in this phase. PROCEDURE_DESC_DBECdbracprovThis procedure extends an existing cluster database to a set of new nodes. Grid Infrastructure and Oracle database are extended and configured by the procedure. PHASE_DESC_INST_CVUQDISKdbracprovInstalls CVUQDISK package if not found on the system. PHASE_HDR_CVU_PREDBdbracprovCluster Verification Utility PHASE_DESC_CLEAN_DBdbracprov DIR_DESC_PREREQdbracprovThis step sets up the stage area for prereqs and fixups runs on all the nodes. It then performs the prereqs and fix-ups. DIR_DESC_REG_CRSdbracprovThis step registers the Grid Infrastructure target and ensures that the Grid Infrastructure Home is recognised for ECM Collections. DIR_HDR_FORMAT_OCFSdbracprovFormating OCFS Paritions. DIR_PREPARE_CRS_CLONE_ZIP_DESCdbracprovStep to prepare an archive file of the Grid Infrastructure Oracle home of the existing cluster database. This is done from the selected reference target. STEP_NAME_UPDATE_INVENTORYdbracprovUpdate Inventory PHASE_DESC_REMOVE_OCRdbracprovRemoves Oracle Grid Infrastructure Registry (OCR) before complete Grid Infrastructure deletion. PHASE_DESC_DB_VERIFYdbracprovVerify cluster database installation on all the hosts. DIR_FSTAB_COPY_NAMEdbracprovCopy fstab file DIR_CRS_RACGONS_CONFIG_NAMEdbracprovGrid Infrastructure configuration PHASE_CRS_RACGONS_CONFIG_NAMEdbracprovGrid Infrastructure configuration DIR_PREPARE_ASM_CLONE_ZIP_NAMEdbracprovSource ASM Archive preparation DIR_DESC_RAC_EXE_PREREQ_CHECKSdbracprovExecutes the prerequisite checks on the nodes to provision the cluster. This step is performed on Unix operating systems. This step may fail if one or more of the prerequisites are notmet. Failure to execute this step will not cause the deployment procedure to fail. PHASE_STAGE_RAC_CLONE_ZIP_DESCdbracprovIn this phase the Oracle Real Application Cluster Database archive is copied to the nodes that require Oracle Real Application Cluster Database installation and staged to the Real Application Cluster Database Oracle Home location. DIR_DESC_INSTALL_CRSdbracprovThis step lays down Oracle Grid Infrastructure software bits. STEP_NAME_REMOVE_OCRdbracprovRemove Grid Infrastructure Registry DIR_HDR_PREREQdbracprovPrereq Fixup Step DIR_OCFS2_COPY_NAMEdbracprovCopy Cluster Config file DIR_OCFS2_UPDATE_NAMEdbracprovocfs2 Cluster Configuration update