[Strings.0804]
MSFT                = "Microsoft"
VIA                 = "VIA Technologies, Inc."
Amertek             = "Amertek"
IODATA              = "I-O DATA DEVICE, INC."
DLINK               = "D-Link"
corega              = "Corega K.K."
ELECOM              = "ELECOM"
DCDLINK             = "Digitalchina/D-Link"
PLANX               = "PLANEX COMMUNICATIONS INC."
CNet                = "CNet Technology Inc."
Edimax              = "EDIMAX"
GIGABYTE            = "GIGA-BYTE TECHNOLOGY CO., LTD"
LinkSys             = "The Linksys Group Inc."
DiskName            = "VIA 10/100 Fast Ethernet Adapter driver disk"

SpeedDuplexSet      = "速度和双工设置"
autoN               = "自动协商"
10HD                = "10 Mbps 半双工"
10FD                = "10 Mbps 全双工"
100HD               = "100 Mbps 半双工"
100FD               = "100 Mbps 全双工"
RXBuffer            = "接收缓冲区"
TXBuffer            = "传输缓冲区"
FlowCtl             = "流控制"
Disabled            = "已禁用"
Enabled             = "已启用"
EnableTx            = "已启用 Tx"
EnableRx            = "已启用 Rx"
EnableRxTx          = "已启用 Rx 和 Tx"
8021pq              = "优先级和 VLAN"
PQDisabled          = "已禁用优先级和 VLAN"
PQEnabled           = "已启用优先级和 VLAN"
AI                  = "中断裁决"
NetAddress          = "网络地址"
IPCKSMv4            = "IPv4 校验和卸载"
TCPCKSMv4           = "TCP 校验和卸载(IPv4)"
UDPCKSMv4           = "UDP 校验和卸载(IPv4)"

VLANID              = "VLAN ID"

Amertek.DeviceDesc    = "Amertek C110TX PCI Fast Ethernet Adapter"
GEN106S.DeviceDesc    = "VIA Rhine III Compatible Management Adapter"
GEN106J.DeviceDesc    = "VIA Rhine III Compatible Fast Ethernet Adapter"
GEN65.DeviceDesc      = "VIA Rhine II Compatible Fast Ethernet Adapter"
GEN43.DeviceDesc      = "VIA VT86C100A Rhine Compatible Fast Ethernet Adapter"
VT3106S.DeviceDesc    = "VIA Rhine III Management Adapter"
VT3106J.DeviceDesc    = "VIA Rhine III Fast Ethernet Adapter"
VT3065.DeviceDesc     = "VIA Rhine II Fast Ethernet Adapter"
VT3043.DeviceDesc     = "VIA VT86C100A Rhine Fast Ethernet Adapter"
DFE538TX.DeviceDesc   = "D-Link DFE-538TX PCI Fast Ethernet Adapter"
DFE530TXF.DeviceDesc  = "D-Link DFE-530TX+ PCI Fast Ethernet Adapter (rev.F)"
DFE520TX.DeviceDesc   = "D-Link DFE-520TX PCI Fast Ethernet Adapter"
DFE530TXD.DeviceDesc  = "D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.D)"
DFE530TXC.DeviceDesc  = "D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.C)"
DFE530TXB3.DeviceDesc = "D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.B)"
DFE530TXB.DeviceDesc  = "D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.B)"
DFE530TXA2.DeviceDesc = "D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.A)"
DFE530TXA.DeviceDesc  = "D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.A)"
coregaTXL.DeviceDesc  = "corega FEther PCI-TXL Ethernet Adapter"
coregaTXM.DeviceDesc  = "corega FEther PCI-TXM Ethernet Adapter"
coregaTX2.DeviceDesc  = "corega FastEther II PCI-TX Ethernet Adapter"
LD100ALB.DeviceDesc   = "Laneed LD-10/100AL PCI Fast Ethernet Adapter (rev.B)"
LD100ALA.DeviceDesc   = "Laneed LD-10/100AL PCI Fast Ethernet Adapter (rev.A)"
LD100AWL.DeviceDesc   = "Laneed LD-10/100AWL Fast Ethernet Adapter"
DDFE530TXB.DeviceDesc = "Digitalchina/D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.B)"
IODATA.DeviceDesc     = "I-O DATA ET100-PCI-S Fast Ethernet Adapter"
PL3065.DeviceDesc     = "Planex FNW-9702-T Fast Ethernet Adapter"
PL3043.DeviceDesc     = "Planex FNW-9700-T Fast Ethernet Adapter"
CN106JWOL.DeviceDesc  = "CNet 10/100 Mbps PCI Wake On LAN Fast Ethernet Adapter"
CN106J.DeviceDesc     = "CNet 10/100 Mbps PCI Fast Ethernet Adapter"
EN9150.DeviceDesc     = "EDIMAX EN-9150 SERIES PCI Fast Ethernet Adapter"
GNFE605.DeviceDesc    = "GN-FE605 Fast Ethernet Adapter"
GNFE605M.DeviceDesc   = "GN-FE605M Management Ethernet Adapter"
LS6105M.DeviceDesc    = "EtherFast 10/100 Managed Network Adapter"

FET.Service.DispName = "VIA Rhine-Family 快速以太网适配器驱动程序"