#pragma namespace("\\\\.\\Root\\IntelNCS2")
instance of __namespace{ name="ms_409";};
#pragma namespace("\\\\.\\Root\\IntelNCS2\\ms_409")

[Description("IANet_EthernetAdapter abstract base class objectifies the general network characteristics of the Intel NIC. In this class, the lower level networking properties are presented. Note that only the network relationships are in this class. The controller characteristics are presented separately.") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_EthernetAdapter : CIM_EthernetAdapter
{
  [Description("An array of strings indicating the network addresses for an adapter.") : Amended ToSubclass] string NetworkAddresses[];
  [Description("MiniPortName represents the Win32 kernel mode service name of the adapter.") : Amended ToSubclass] string MiniPortName;
  [Description("MiniPortInstance distinguishes a network device from other devices of the same type on a machine. It is a unique string without any path-separator characters that contains serial-number information, if supported by the underlying bus, or some kind of location information. The format of the string is bus specific. It is persistent across system boots.") : Amended ToSubclass] string MiniPortInstance;
};

[Description("IANet_PhysicalEthernetAdapter concrete class objectifies the general network characteristics of the Intel NIC. In this class, the lower level networking properties are presented. Note that only the network relationships are in this class. The controller characteristics are presented separately.") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_PhysicalEthernetAdapter : IANet_EthernetAdapter
{
  [Description("PartNumber is the NIC's PBA manufacturing part number") : Amended] string PartNumber;
  [Description("SanMacAddress is the MAC address assigned by the SAN server") : Amended] string SanMacAddress;
  [Description("ETrackID is the EEPROM Version") : Amended] string ETrackID;
  [Description("The textual representation of the speed") : Amended] string SpeedString;
  [Description("Indicates the current status for the adapter") : Amended,ValueMap{"0", "1", "2", "3"} : Amended,Values{"Disabled", "Link Up", "Link Down", "Not Present"} : Amended] uint16 DeviceStatus;
  [Description("Specifies the current status of the adapter.") : Amended] string DeviceStatusString;
  [Description("This setting has been deprecated and is no longer supported") : Amended,ValueMap{"0"} : Amended,Values{"This setting has been deprecated and is no longer supported"} : Amended] uint16 PHYDevice;
  [Description("This setting has been deprecated and is no longer supported") : Amended] string OtherPhyDevice;
  [Description("Bus Type indicates the bus type") : Amended,ValueMap{"0", "1", "2", "3", "4", "5", "6", "7"} : Amended,Values{"Unknown", "ISA", "EISA", "PCMCIA", "CardBus", "PCI", "PCI-X", "PCI Express"} : Amended] uint16 BusType;
  [Description("Negotiated Link Speed specifies the negotiated link speed of the bus") : Amended,ValueMap{"0", "1", "2", "3"} : Amended,Values{"Not Supported", "2.5 GT/s", "5.0 GT/s", "8.0 GT/s"} : Amended] uint16 NegotiatedLinkSpeed;
  [Description("Negotiated Link Width specifies the negotiated link width of the bus") : Amended,ValueMap{"0", "1", "2", "4", "8", "16"} : Amended,Values{"Not Supported", "x1", "x2", "x4", "x8", "x16"} : Amended] uint16 NegotiatedLinkWidth;
  [Description("PortNumber indicates the port number on PCIe Quad port adapters") : Amended,ValueMap{"0", "1", "2", "3"} : Amended,Values{"A", "B", "C", "D"} : Amended] uint16 PortNumber;
  [Description("PartitionNumber indicates the partition number of NPAR enabled adapters") : Amended] uint16 PartitionNumber;
  [Description("MediaType indicates the media which interfaces to this phy") : Amended,ValueMap{"0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12"} : Amended,Values{"Unknown", "Copper", "Fiber", "Phone Line", "CX4 Copper", "SFP+ Direct Attach", "SR Fiber", "LR Fiber", "KX/KX4 Backplane", "SerDes", "Backplane", "XAUI", "SFP+ Active Direct Attach"} : Amended] uint16 MediaType;
  [Description("ExtendedStatus contains additional status information for the adapter") : Amended] uint64 ExtendedStatus;
  [Description("This setting has been deprecated and is no longer supported.") : Amended] string OtherMediaType;
  [Description("The Controller ID identifies the Ethernet controller that the adapter uses. Adapters with different DeviceIDs can have the same Controller ID") : Amended,ValueMap{"0", "1", "3", "6", "7", "8", "11", "13", "20", "30", "31", "40", "50", "51", "52", "60", "62", "63", "65537", "65538", "65539", "65540", "65541", "65542", "65543", "65544", "65545", "65546", "65547", "65548", "65549", "65550", "65551", "65552", "65553", "131073", "196609", "196610", "327681"} : Amended,Values{"Unknown", "Intel 82542 Controller", "Intel 82543 Controller", "Intel 82544 Controller", "Intel 82540 Controller", "Intel 82545 Controller", "Intel 82541 Controller", "Intel 82547 Controller", "Intel 82571 Controller", "Intel 82573 Controller", "Intel 82574 Controller", "Intel ESB2LAN Controller", "Intel ICH8 Controller", "Intel ICH9 Controller", "Intel ICH10 Controller", "Intel 82575 Controller", "Intel 82576 Controller", "Intel ADORAM_VIRTUAL Controller", "Intel D100_A_STEP Controller", "Intel D100_B_STEP Controller", "Intel D100_C_STEP Controller", "Intel D101_A_STEP Controller", "Intel D101_B0_STEP Controller", "Intel D101M_A_STEP Controller", "Intel D101S_A_STEP Controller", "Intel D102_A_STEP Controller", "Intel D102_B_STEP Controller", "Intel D102_C_STEP Controller", "Intel D102_D_STEP Controller", "Intel D102_E_STEP Controller", "Intel D102_F_STEP Controller", "Intel 82562_G Controller", "Intel 82562_GZ Controller", "Intel 82562_GX_GT Controller", "Intel 82562 Controller", "Intel 82597 EX Controller", "Intel 82598 Controller", "Intel 82599 Controller", "Intel XL710 Controller"} : Amended] uint32 ControllerID;
  [Description("Adapter status specifies the current status of the adapter.") : Amended,Bitmap{"1", "2", "4", "16", "32", "1024", "2048"} : Amended,Bitvalues{"Installed", "DriverLoaded", "HardwareMissing", "HasDiag", "HasLink", "HasTCOEnabled", "DeviceError"} : Amended] uint32 AdapterStatus;
  [Description("EEE Link Status specifies the current EEE status of the link.") : Amended,Bitmap{"0", "1", "2"} : Amended,Bitvalues{"No EEE", "EEE Negotiated", "EEE Negotiated and running LPI"} : Amended] uint64 EEELinkStatus;
  [Description("Lists the capabilities of the device.") : Amended,Values{"Unknown", "Other", "AlertOnLan", "WakeOnLan", "Adapter Fault Tolerance", "Adaptive Load Balancing", "IPSec Offload", "ASF", "Feature Not Supported", "Static Link Aggregation", "IEEE 802.3ad Dynamic Link Aggregation", "Checksum Offload", "Switch Fault Tolerance", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "Feature Not Supported", "TCO Capability", "Wake Up Capabilities", "IP Checksum Offload", "10 Mbps", "100 Mbps", "1000 Mbps", "10000 Mbps", "Teaming", "VLAN", "IEEE VLAN", "ISL VLAN", "Feature Not Supported", "Identify Adapter Support", "Cable Test Support", "Diagnostic Support", "Flash support", "ICH Support", "Usage Server", "Vendor Intel", "Feature Not Supported", "Feature Not Supported", "PowerManagement Support", "Feature Not Supported", "MFO", "Pass Through", "Quad-Port Support", "Dedicated MAC Address", "Jumbo Frame Support", "Feature Not Supported", "Signal Quality Test", "Cable Offline Test", "Adapter is LOM", "Scalable Networking Pack Capability", "CB Platform Capability", "iSCSI Capability", "LinkSec Capability", "DCB Capability", "FCoE Capability", "KX Module Capability", "Virtual Machines Load Balancing", "Performance Profile Support", "OS2BMC", "AMT Capable", "2500 Mbps", "Basic Support", "Extended Support", "40000 Mbps", "NPAR Enabled"} : Amended] uint16 Capabilities[];
  [Description("An array of free-form strings providing more detailed explanations for any of the Physical Ethernet Adapter features indicated in the Capabilities array. Note, each entry of this array is related to the entry in the Capabilities array that is located at the same index.") : Amended] string CapabilityDescriptions[];
  [Description("Hardware status specifies the current status of the hardware") : Amended,Values{"Unknown", "Ready", "Initializing", "Reset", "Closing", "Not Ready"} : Amended] uint32 HardwareStatus;
  [Description("This setting has been deprecated and is no longer supported.") : Amended] uint16 OtherEnabledCapabilityIDs[];
  [Description("This setting has been deprecated and is no longer supported.") : Amended] string OtherEnabledCapabilities[];
  [Description("This setting has been deprecated and is no longer supported.") : Amended] string OtherCapabilityDescriptions[];
  [Description("SlotID field of the System Slot structure provides a mechanism to correlate the physical attributes of the slot to its logical access method.") : Amended] string SlotID;
  [Description("The Location property displays the bus, device, function and segment PCI configuration space information for the adapter.") : Amended] string Location;
  [Description("EEPROMVersion contains the EEPROM version of the device.") : Amended] string EEPROMVersion;
  [Description("OTPVersion contains the OTP version of the device.") : Amended] string OTPVersion;
  [Description("Original display name of the adapter. ") : Amended] string OriginalDisplayName;
  [Description("PCI device Id of the device.") : Amended] string PCIDeviceID;
  [Description("Displays the connection name of the device.") : Amended] string ConnectionName;
  [Description("GetHbaPath will return the path to the corresponding HBA's instance in Device Mananger.") : Amended] uint32 GetHbaPath([out] string HbaPath);
  [Description("IsFcoePagingFileLocatedOnTarget will return whether or not the port has an FCoE paging file on a remote target.") : Amended] uint32 IsFcoePagingFileLocatedOnTarget([out] boolean bHasRemotePagingFile);
  [Description("IdentifyAdapter will flash the light on the adapter for a few seconds to enable the user to identify it.  This method will only work for physical adapters.") : Amended] uint32 IdentifyAdapter([in] uint16 nSeconds);
  [Description("GetPowerUsageOptions detects any optional power usage settings. For example, power usage for standby, battery operation etc.") : Amended] uint32 GetPowerUsageOptions([OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 AutoPowerSaveModeEnabled,[OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 ReduceSpeedOnPowerDown,[OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 SmartPowerDown,[OUT,ValueMap{"1", "2"} : Amended,Values{"Normal Power", "Low Power"} : Amended] uint32 SavePowerNowEnabled,[OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 EnhancedASPMPowerSaver,[OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "BatteryMode"} : Amended] uint32 ACBSMode,[OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 LinkSpeedBatterySaver,[OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 SystemIdlePowerSaver);
  [Description("This method can be used to makes changes to the power usage options. For example, this method could be used to reduce power usage for standby, battery operation etc. Note power usage settings are stored and used for every boot.") : Amended] uint32 SetPowerUsageOptions([IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 AutoPowerSaveModeEnabled,[IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 ReduceSpeedOnPowerDown,[IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 SmartPowerDown,[IN,ValueMap{"1", "2"} : Amended,Values{"Normal Power", "Low Power"} : Amended] uint32 SavePowerNowEnabled,[IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 EnhancedASPMPowerSaver,[IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "BatteryMode"} : Amended] uint32 ACBSMode,[IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 LinkSpeedBatterySaver,[IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 SystemIdlePowerSaver);
  [Description("GetWakeOnLanPowerOptions returns WakeOnLan power settings. For example, information about wakeonlink, wakeonmagicpacket etc..") : Amended] uint32 GetWakeOnLanPowerOptions([OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 WakeFromPowerOff,[OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 WakeOnLink,[OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 WakeOnMagicPacket,[OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 WakeOnDirectedPacket,[OUT,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 WakeOnPattern);
  [Description("This method can be used to makes changes to the WakeOnLan options. For example, this method could be used to set options like wakefromPoweroff, wakeOnlink, WakeOnMagicPacket, WakeOnDirectedPacket etc. Note WakeOnLan settings are stored and used for every boot.") : Amended] uint32 SetWakeOnLanPowerOptions([IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 WakeFromPowerOff,[IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 WakeOnLink,[IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 WakeOnMagicPacket,[IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 WakeOnDirectedPacket,[IN,ValueMap{"0", "1"} : Amended,Values{"Disabled", "Enabled"} : Amended] uint32 WakeOnPattern);
  [Description("This method is used to makes changes to the Power managementcapabilities during DMIX install so that any upgrade scenarios from earlier releases will have the right options for all the WakeOnLAN options and DMIX will not have reinterpret them dynamically") : Amended] uint32 SetPowerMgmtCapabilities();
  [Description("This method can be used to check if SetPowerMgmtCapabilities() needs to be called.") : Amended] uint32 IsSetPowerMgmtCapabilitiesReq([OUT] boolean bIsSetRequired);
  [Description("This method can be used to check if iSCSI is supported by the OS and iSCSI patch and hotfix are installed.") : Amended] uint32 IsiSCSISupported([OUT] boolean bIsiSCSIOS,[OUT] boolean bIsiSCSIPatch,[OUT] boolean bIsiSCSIHotFix);
  [Description("This method can be used to determine if the passed in setting will be changed when the new team is created.Depending on the adapters in the team and which features each supports, the setting may be disabled to synchronize the setting accross all adapters in the team.") : Amended] uint32 ValidateSettingOnNewTeam([IN] string Adapters[],[IN] string SettingName,[OUT] uint64 ValResult);
  [Description("This method can be used to determine the available team modes based on the current configuration.") : Amended] uint32 GetListOfAvailableTeamModes([IN] string Adapters[],[OUT] uint32 TeamModes[]);
  [Description("This method can be used to determine if any of the settings supported by the list of adapters passed in will be changed when the new team is created.Depending on the adapters in the team and the features each device supports, a setting's value may need to change in order to synchronize the setting's value accross all devices in the team.") : Amended] uint32 ValidateSettingOnNewTeamEx([IN] string Adapters[],[IN] uint32 PerformanceProfile,[IN] uint32 Reserved1,[IN] uint32 Reserved2,[OUT] uint64 ValResult);
  [Description("This method determines if there is a common performance profile that is supported by all the devices passed in first parameter.  The method returns an array of the performance profiles are the supported by the new team.") : Amended] uint32 GetListOfSupportedPerformanceProfilesOnNewTeam([IN] string Adapters[],[OUT] string PerformanceProfileNames[],[OUT] uint32 PerformanceProfileValues[]);
  [Description("This method will be used during the installation of DMIX to setup the DCE service with the default DCB settings.") : Amended] uint32 SetupDCB_Defaults([OUT] uint32 ValResult);
  [Description("This method can be used to check if iSCSI is enabled on that adapter.") : Amended] uint32 IsiSCSIEnabled([OUT,Values{"0", "1", "2", "3"} : Amended] uint32 iSCSIStatus);
  [Description("This method can be used to check if Macsec is enabled on that adapter.") : Amended] uint32 IsMacsecEnabled([OUT,Values{"0", "1", "2"} : Amended] uint32 iMacsecStatus);
  [Description("This method can be used to check if Macsec driver is bound to that adapter.") : Amended] uint32 IsMacsecEnabledOnDevice([OUT] boolean bMacsecBound);
  [Description("This method can be used to check if AMT is enabled on adapter.") : Amended] uint32 IsAmtEnabledOnDevice([OUT] boolean bAmtEnabled);
  [Description("This method can be used to get the NDIS version") : Amended] uint32 GetNDISVersion([OUT] uint32 dwMajorVersion,[OUT] uint32 dwMinorVersion);
  [Description("This method can be used check if the fan is running on the adapter.  NOTE:  not all devices support this functionality") : Amended] uint32 GetAdapterFanStatus([OUT,ValueMap{"0", "1", "2"} : Amended,Values{"Not Supported", "Not Active", "Active"} : Amended] uint32 dwAdapterFanStatus);
  [Description("This method can be used to check if warnings exist on the adapter.  NOTE:  not all devices support this functionality") : Amended] uint32 GetAdapterWarnings([OUT] UINT64 dwAdapterWarnings);
  [Description("This method should be called during the installation when the FCoE feature is installed.  FCoE enabled adapter perform better with Jumbo Frames enabled.") : Amended] uint32 EnableJumboFramesOnFcoeDevices();
  [Description("This method is only to be called by the DMIX installer during a clean installation of DMIX or with the add or removal of the FCoE feature.") : Amended] uint32 InitializePerformanceProfilesOnDevices([IN] boolean bInitializeValues,[OUT] uint64 ValResult);
  [Description("This method validates settings the user has changed.") : Amended] uint32 ValidateSettingsModification([IN] SettingObj settings[],[IN] uint32 bSetValues,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method set settings.") : Amended] uint32 SetSettings([IN] SettingObj settings[]);
  [Description("ValidateCreateVLAN is used to validate a new VLAN can be created for this adapter.") : Amended] uint16 ValidateCreateVLAN([in] string VLANNumbers,[in] string Name,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method gets the settings relevant to the indicated profile.") : Amended] uint32 GetSettingsForProfile([IN] uint32 PerformanceProfile,[OUT] string settings[],[OUT] string values[],[OUT] WarningMessageObj WarningMessages[]);
};

[Description("IANet_Setting objectifies instance related driver and network device settings. IANet_Setting is an Abstract superclass for a set of concrete classes of different types.  This set of classes allows open ended usage of a variable number of settings.  These can be different for different adapters, teams or VLANs and it may not always be possible to predict what parameters will be required.") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_Setting : CIM_Setting
{
  [Key,Description("ParentId identifies the object that this parameter is for. This is used to ensure that the parameters have unique keys - applications should use associations to link settings with managed elements.") : Amended ToSubclass] string ParentId;
  [Key,Description("ParentType identifies the type of object that this parameter is for. This can take one of the following values:\n\t\tVLAN - for VLAN settings\n\t\tNIC - for Adapter settings\n\t\tTeam - for Team settings\n") : Amended ToSubclass] string ParentType;
  [Key,Description("Specifies the name of the setting as it appears in the registry.") : Amended ToSubclass] string Caption;
  [Description("Specifies the name of the device that is associated with the setting.") : Amended ToSubclass] string Name;
  [Description("Specifies the name of the setting as it appears in the registry.") : Amended ToSubclass] string RegistryKeyword;
  [Description("Specifies the description of the setting.") : Amended ToSubclass] string Description;
  [Description("Specifies the description of the setting.") : Amended ToSubclass] string DisplayName;
  [Description("This property has been deprecated.") : Amended ToSubclass] string MiniHelp;
  [Description("Expose level of setting. For example, based on the expose level management application could determine whether this setting could be exposed to the user.") : Amended,ValueMap{"0", "1"} : Amended ToSubclass,Values{"Zero", "One"} : Amended ToSubclass] uint32 ExposeLevel;
  [Description("Writable is true if the setting can be changed and false if the setting cannot be changed. If this attribute is NULL then the user needs to do a pre-check to see if the setting can be saved.") : Amended ToSubclass] boolean Writable;
  [Description("Some settings require a session to be set. If this is true then this setting requires a session. The setting will not be saved until the Apply method of IANet_NetService is called.") : Amended ToSubclass] boolean RequiresSession;
  [Description("Some of the settings are grouped under specific categories.Grouped is true if the setting is grouped.") : Amended ToSubclass] boolean Grouped;
  [Description("Some of the settings are grouped under specific categories.This attribute specifies the Id of the group under which this setting belongs.") : Amended ToSubclass] uint16 GroupId;
  [Description("This attribute specifies the Id of the setting detail under which this setting belongs.") : Amended ToSubclass] uint64 DetailId;
};

[Description("IANet_AdapterSetting objectifies Adapter instance related driver and network device settings. IANet_AdapterSetting is an Abstract superclass for a set of concrete classes of different types.  This set of classes allows open ended usage of a variable number of settings.") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_AdapterSetting : IANet_Setting
{
};

[Description("IANet_AdapterSettingInt objectifies Adapter related driver and network device settings. IANet_AdapterSettingInt specifically handles Integer settings. The following constraints are placed on the CurrentValue and default value:\n\tmin <= CurrentValue <= max\n\t( CurrentValue - base ) is a multiple of step\n") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_AdapterSettingInt : IANet_AdapterSetting
{
  [Description("Min is the minimum value that the integer can take.") : Amended] sint64 min;
  [Description("Max is the maximum value that the integer can take.") : Amended] sint64 max;
  [Description("Step is the granularity of the integer value.") : Amended] sint64 step;
  [Description("Base is the root from which the integer value may take values. i.e.  CurrentValue - base is a multiple of step.") : Amended] uint64 base;
  [Description("DefaultValue is the initial value of the parameter.") : Amended] sint64 DefaultValue;
  [Description("Specifies the current value of the setting - this is the only attribute that the user can change.") : Amended] sint64 CurrentValue;
  [Description("Specifies the value of the setting from the registry.") : Amended] sint64 RegistryValue;
  [Description("Specifies the current value of the setting.") : Amended] string DisplayValue;
  [Description("Scale is unit of measurement to set or estimate series of marks or points at known intervals to measure value of the parameter.") : Amended] sint64 Scale;
  [Description("This method is called to check if the change in the setting will have any impact on other settings or to the user's experience.") : Amended] uint32 ValidateSettingModification([IN] sint64 CurrentValue,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method returns information related to changing the setting's value.  The DisplayValue parameter specifies the new value of the setting.The WarningMessages object parameter returns any error messages associated with changing the setting to the new value.") : Amended] uint32 ValidateSettingModificationEx([IN] string DisplayValue,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method returns information related to changing the setting's value.  The CurrentValue or DisplayValue parameter specifies the new value of the setting.Use the SetValuesOnNoError to save the updates if no errors are encountered.The WarningMessages object parameter returns any error messages associated with changing the setting to the new value.") : Amended] uint32 ValidateAndSetSetting([IN] sint64 CurrentValue,[IN] string DisplayValue,[IN] uint32 SetValuesOnNoError,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method is called to set the setting to its default.") : Amended] uint32 SetDefault();
};

[Description("IANet_AdapterSettingEnum objectifies Adapter related driver and network device settings. IANet_AdapterSettingEnum specifically handles Enumeration settings") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_AdapterSettingEnum : IANet_AdapterSetting
{
  [Description("PossibleValues is an array of the possible values allowed for the enum.") : Amended] sint64 PossibleValues[];
  [Description("DescriptionMap describes what each value means.") : Amended] string DescriptionMap[];
  [Description("Specifies the current value of the setting - this is the only attribute that the user can change.") : Amended] sint64 CurrentValue;
  [Description("Specifies the value of the setting from the registry.") : Amended] sint64 RegistryValue;
  [Description("Specifies the current value of the setting.") : Amended] string DisplayValue;
  [Description("DefaultValue is the initial setting for this value.") : Amended] sint64 DefaultValue;
  [Description("This method is called to check if the change in the setting will have any impact on other settings or to the user's experience.") : Amended] uint32 ValidateSettingModification([IN] sint64 CurrentValue,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method returns information related to changing the setting's value.  The DisplayValue parameter specifies the new value of the setting.The WarningMessages object parameter returns any error messages associated with changing the setting to the new value.") : Amended] uint32 ValidateSettingModificationEx([IN] string DisplayValue,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method returns information related to changing the setting's value.  The CurrentValue or DisplayValue parameter specifies the new value of the setting.Use the SetValuesOnNoError to save the updates if no errors are encountered.The WarningMessages object parameter returns any error messages associated with changing the setting to the new value.") : Amended] uint32 ValidateAndSetSetting([IN] sint64 CurrentValue,[IN] string DisplayValue,[IN] uint32 SetValuesOnNoError,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method is called to set the setting to its default.") : Amended] uint32 SetDefault();
};

[Description("IANet_AdapterSettingSlider objectifies Adapter related driver and network device settings. IANet_AdapterSettingSlider specifically handles Slider settings") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_AdapterSettingSlider : IANet_AdapterSetting
{
  [Description("PossibleValues is an array of all the possible values.  The values should be arranged with the first value on the left of the slider and the last value on the right. ") : Amended] sint64 PossibleValues[];
  [Description("CurrentValue is the current setting for this parameter.") : Amended] sint64 CurrentValue;
  [Description("Specifies the value of the setting from the registry.") : Amended] sint64 RegistryValue;
  [Description("DefaultValue is the initial setting for this parameter.") : Amended] sint64 DefaultValue;
  [Description("FirstLabel is the label that should be displayed on the left of the slider.") : Amended] string FirstLabel;
  [Description("LastLabel is the label that should be displayed on the right of the slider.") : Amended] string LastLabel;
  [Description("This method is called to check if the change in the setting will have any impact on other settings or to the user's experience.") : Amended] uint32 ValidateSettingModification([IN] sint64 CurrentValue,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method returns information related to changing the setting's value.  The CurrentValue or DisplayValue parameter specifies the new value of the setting.Use the SetValuesOnNoError to save the updates if no errors are encountered.The WarningMessages object parameter returns any error messages associated with changing the setting to the new value.") : Amended] uint32 ValidateAndSetSetting([IN] sint64 CurrentValue,[IN] uint32 SetValuesOnNoError,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method is called to set the setting to its default.") : Amended] uint32 SetDefault();
};

[Description("IANet_AdapterSettingMultiSelection objectifies Adapter related driver and network device settings. IANet_AdapterSettingMultiSelection specifically handles Multi Selection settings.") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_AdapterSettingMultiSelection : IANet_AdapterSetting
{
  [Description("PossibleValues is an array of all the possible selections.") : Amended] sint64 PossibleValues[];
  [Description("DescriptionMap is an array of descriptions of the possible selections.") : Amended] string DescriptionMap[];
  [Description("Current value is a bit-wise OR of the currently chosen options from the possible values.") : Amended] sint64 CurrentValue;
  [Description("Registry value is a bit-wise OR of the currently chosen options from the possible values.") : Amended] sint64 RegistryValue;
  [Description("Default value is a bit-wise OR of the default options from the possible values.") : Amended] sint64 DefaultValue;
  [Description("This method is called to check if the change in the setting will have any impact on other settings or to the user's experience.") : Amended] uint32 ValidateSettingModification([IN] sint64 CurrentValue,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method returns information related to changing the setting's value.  The CurrentValue or DisplayValue parameter specifies the new value of the setting.Use the SetValuesOnNoError to save the updates if no errors are encountered.The WarningMessages object parameter returns any error messages associated with changing the setting to the new value.") : Amended] uint32 ValidateAndSetSetting([IN] sint64 CurrentValue,[IN] uint32 SetValuesOnNoError,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method is called to set the setting to its default.") : Amended] uint32 SetDefault();
};

[Description("IANet_AdapterSettingString objectifies Adapter related driver and network device settings. IANet_AdapterSettingString specifically handles String settings.") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_AdapterSettingString : IANet_AdapterSetting
{
  [Description("MaxLength is the maximum length of the string.") : Amended] uint32 MaxLength;
  [Description("Specifies the current value of the setting - this is the only attribute that the user can change.") : Amended] string CurrentValue;
  [Description("Specifies the value of the setting from the registry .") : Amended] string RegistryValue;
  [Description("Specifies the current value of the setting.") : Amended] string DisplayValue;
  [Description("DefaultString is the initial value for the parameter.") : Amended] string DefaultValue;
  [Description("This method is called to check if the change in the setting will have any impact on other settings or to the user's experience.") : Amended] uint32 ValidateSettingModification([IN] string CurrentValue,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method returns information related to changing the setting's value.  The DisplayValue parameter specifies the new value of the setting.The WarningMessages object parameter returns any error messages associated with changing the setting to the new value.") : Amended] uint32 ValidateSettingModificationEx([IN] string DisplayValue,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method returns information related to changing the setting's value.  The CurrentValue or DisplayValue parameter specifies the new value of the setting.Use the SetValuesOnNoError to save the updates if no errors are encountered.The WarningMessages object parameter returns any error messages associated with changing the setting to the new value.") : Amended] uint32 ValidateAndSetSetting([IN] string CurrentValue,[IN] string DisplayValue,[IN] uint32 SetValuesOnNoError,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method is called to set the setting to its default.") : Amended] uint32 SetDefault();
};

[Description("IANet_AdapterSettingMultiString objectifies Adapter related driver and network device settings. IANet_AdapterSettingMultiString specifically handles Multi String settings.") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_AdapterSettingMultiString : IANet_AdapterSetting
{
  [Description("MaxLength is the maximum length of the string.") : Amended] uint32 MaxLength;
  [Description("Specifies the current value of the setting - this is the only attribute that the user can change.") : Amended] string CurrentValues[];
  [Description("Specifies the current value of the setting from the registry - this is the only attribute that the user can change.") : Amended] string RegistryValue[];
  [Description("Specifies the current value of the setting.") : Amended] string DisplayValue[];
  [Description("DefaultString is the initial value for the parameter.") : Amended] string DefaultValue;
  [Description("This method is called to check if the change in the setting will have any impact on other settings or to the user's experience.") : Amended] uint32 ValidateSettingModification([IN] string CurrentValues[],[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method returns information related to changing the setting's value.  The DisplayValue parameter specifies the new value of the setting.The WarningMessages object parameter returns any error messages associated with changing the setting to the new value.") : Amended] uint32 ValidateSettingModificationEx([IN] string DisplayValue[],[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method returns information related to changing the setting's value.  The CurrentValue or DisplayValue parameter specifies the new value of the setting.Use the SetValuesOnNoError to save the updates if no errors are encountered.The WarningMessages object parameter returns any error messages associated with changing the setting to the new value.") : Amended] uint32 ValidateAndSetSetting([IN] string CurrentValues[],[IN] string DisplayValues[],[IN] uint32 SetValuesOnNoError,[OUT] WarningMessageObj WarningMessages[]);
  [Description("This method is called to set the setting to its default.") : Amended] uint32 SetDefault();
};

[Description("This class associates Intel NICs with their respective settings.") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_AdapterToSettingAssoc : CIM_ElementSetting
{
  [Description("The Adapter to which the Setting object belongs.") : Amended] IANet_PhysicalEthernetAdapter Ref Element;
  [Description("The Setting belonging to the Adapter.") : Amended] IANet_AdapterSetting Ref Setting;
};

[Description("IANet_NetService is used to manage the interface supported by the provider.  All set operations require a unique Client handle in the context if they are to succeed.") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_NetService : CIM_Service
{
  [Description("Version of Intel NCS software stack.") : Amended] string Version;
  [Description("The BeginApply method creates a new Client handle that can be used for any set operations on the IANet classes.Parameters:\n\t\tClientSetHandle - returns the new Set handle\nReturn code:\n\t\t0 if operation was successful\n\t\tnon-zero if operation failed - check extended error status\n") : Amended] uint32 BeginApply([OUT] uint32 ClientSetHandle);
  [Description("The GetPartitionsForPort method returns all partitions assocated with the same port as the indicated instance ID.\nReturn code:\n\t\t0 if operation was successful\n\t\tnon-zero if operation failed or no partitions associated - check extended error status\n") : Amended] uint32 GetPartitionsForPort([IN] string szDeviceID,[OUT] PartitionObj partitions[]);
  [Description("The ValidateAndSetBandwidthsForPort method sets the bandwidth information for the indicated partitions.") : Amended] uint32 ValidateAndSetBandwidthsForPort([IN] PartitionObj partitions[],[IN] uint32 SetValuesOnNoError,[OUT] WarningMessageObj WarningMessages[]);
  [Description("The Apply method commits any changes that the user has made with a Client Set handle. After this method is invoked the Client Set Handle is invalidated and a new handle needs to be acquired before the next Set operationParameters:\n\t\tClientSetHandle - Handle with which the set operations were performed\n\t\tFollowupAction - caller may be required to do something before changes will take effect.\nReturn code:\n\t\t0 if operation was successful\n\t\tnon-zero if operation failed - check extended error status\n") : Amended] uint32 Apply([IN] uint32 ClientSetHandle,[OUT,ValueMap{"0", "1"} : Amended,Values{"No Action Required", "Reboot"} : Amended] uint32 FollowupAction);
  [Description("The IsDeviceRLB_Enabled method is used to determine if the miniport passed is a team with RLB enabled or a VLAN on a RLB team.") : Amended] uint32 IsDeviceRLB_Enabled([IN] string szDeviceName,[OUT] boolean bRLB_Blocking_VNIC);
  [Description("The GetPROSetWarnings method is used to determine if any warnings exist.") : Amended] uint32 GetPROSetWarnings([OUT] WarningMessageObj WarningMessages[]);
  [Description("The GetUninstallBlockingErrors method is used to determine if an uninstall can occur.") : Amended] uint32 GetUninstallBlockingErrors([IN] uint32 Filter,[OUT] WarningMessageObj WarningMessages[]);
  [Description("The SynchronizeVmSwitchProtocolSetting method is used to synchronize the *RssOrVmqPreference setting across all base drivers in a team.") : Amended] uint32 SynchronizeVmSwitchProtocolSetting([IN] string szDeviceName,[IN] boolean bIsBinding);
  [Description("The ConfigureNewDevices method is used to configure recently installed devices with default settings.") : Amended] uint32 ConfigureNewDevices([IN] string szDevices[],[IN] UINT64 ConfigurationMask);
  [Description("The UninitializeDevices method is used to reset the list of devices back to the default state.") : Amended] uint32 UninitializeDevices([IN] string szDevices[],[IN] UINT64 ConfigurationMask);
  [Values{"Virtual NICs cannot be created on a team with Receive Load Balancing enabled.  Disable Receive Load Balancing before creating a virtual NIC on this team.", "Reserved"} : Amended] uint16 VNIC_RLB_WarningMessage;
  [Values{"Virtual NICs cannot be created on a team with Receive Load Balancing enabled.  Receive Load Balancing will be disabled if you create a virtual NIC on this team.\n\nDo you want to continue?", "Reserved"} : Amended] uint16 VNIC_DISABLE_RLB_WarningMessage;
  [Values{"Virtual NICs cannot be created on a team with Receive Load Balancing enabled.  Receive Load Balancing will be disabled on the team.", "Reserved"} : Amended] uint16 VNIC_RLB_DIABLED_ON_TEAM_WarningMessage;
};

[Description("IANet_ExtendedStatus is used to return error information back to the caller if something went wrong with an operation.") : Amended,AMENDMENT, LOCALE(0x409)] 
class IANet_ExtendedStatus : __ExtendedStatus
{
  [Description("The code file name in the provider where the error occurred.") : Amended] string File;
  [Description("The line number in the code file where the error occurred.") : Amended] uint32 Line;
  [Description("The ClientSetHandle used in the call that caused the problem.") : Amended] uint32 ClientSetHandle;
  [Description("If a technical rule has failed this array provides several strings explaining the reasons for the failure. ") : Amended] string RuleFailureReasons[];
};

[AMENDMENT, LOCALE(0x409)] 
class PartitionObj
{
  [Description("PortNumber indicates the port number on PCIe Quad port adapters") : Amended,ValueMap{"0", "1", "2", "3"} : Amended,Values{"A", "B", "C", "D"} : Amended] uint16 PortNumber;
};

[AMENDMENT, LOCALE(0x409)] 
class WarningMessagesText
{
  [Description("Lists all the possible warning messages.") : Amended,Values{"Success."} : Amended] uint16 WarningMessagesArray[];
};